Our Products-Our Products-Nanjing Electric International Co., Ltd.

Strong resistance to impurities.The tangential impeller is ableto release the impurity in the fluid at any time so that it will nottwine the impeller blade. 1.Strong resistance to the electromagnetic interference andvibration. 2.The structure and principle of the sensor and display meterare very simple and clear.It is very easy for the user to masterthe use and maintenance technology. 3.The meter coefficients after the impeller and the bearing arereplaced keep unchanged. 4.Wide flow range ad low lower limit of flow speed. 5.Almost no pressure loss,saving power consumption. 6.The sensor can be installed in the open air.The whole sensor can be submerged in the water for use in long term. 7.Unnecessary to cut off the flow for installation and disassembly of sensor with stop valve.

Single Flange Level Transmitter

The single flange level transmitter can accurately measure the level and density of various containers. It comes in two types: flat flange and insert flange, and is suitable for measuring high viscosity media or suspended liquids.

Stainless Steel Differential Pressure Gauge

Stainless steel pressure gauges are widely used in the petroleum, chemical, metallurgical, light industry, and chemical fiber industries. They can measure the pressure of highly corrosive media and can be used in environments with severe vibration and harsh working conditions.

Stent

Lightning arrester insulating support

Transformer Equipment

This product is suitable for use in ring main power supply systems, dual power supply systems, or terminal power supply systems operating at 7.2kV, 12kV, 24kV, 40.5kV, and 72kV, serving as high-voltage distribution metering, compensation control, and protection devices. In addition to the transformer, the pre-assembled substation is equipped with a four-position load switch, a two-position load switch, backup protection fuses, and plug-in fuses on the high-voltage side. The low-voltage side is assembled with control devices, distribution devices, compensation devices, and energy meters according to customer requirements.

Outdoor switchgear

Switch unit configuration and installation, compact and elegant structure, highly reliable and fully functional intelligent terminal device. It adopts a fully enclosed structure to achieve a fully enclosed and fully insulated solution, with intelligent primary equipment and built-in measurement, metering, relay protection, monitoring, and control functions. On-site construction is simple and convenient, saving space. It provides necessary detection information to the outside, facilitating operation and maintenance. Integrated vacuum arc extinguishing chamber utilizing APG technology to enhance overall insulation and environmental resistance performance. Internal dual voltage sensors integrated into the vacuum arc extinguishing chamber enable measurement of incoming and outgoing line voltages. The mechanism employs Ansoft-designed high-performance magnetic actuators, ensuring high reliability and maintenance-free operation.

Complete Electrical Equipment

This product is a long-life switch developed by our company through the introduction and absorption of advanced technologies from similar circuit breakers both domestically and internationally, reaching a leading domestic level. It is suitable for three-phase power systems with an AC frequency of 50/60 Hz, used for switching load currents, overload currents, and short-circuit currents, as well as serving as a tie circuit breaker and for disconnecting and connecting capacitor banks. It is particularly suitable for applications requiring frequent operation.

Switch

KYN61 air insulated metal-clad movable switchgear is an indoor switchgear, assembly operating under the Conditions of 50/60Hz three phase and rated20/40.5kV AC voltage, which applied to the transmission and distribution for generators, transformer substations and the industry and mine enterprises. It also can be used to control, protect and monitor electric circuits, and very useful to frequent operating conditions. It complies with IEC 62271,IEC60943,IEC 60068,IEC 600816,ANSIC37.85 and other relative standards.

Detector

Surge arrester monitor

Circuit breaker

Electric parameter:Rated voltage:12KV-24kV-36kVRated current:630A-1250APower frequency withstand:42/65/95KVLighting impluse withstand voltage:95/150/215kVShort circuit withstand:20/25kA Rated Current: 630A-1250A Power Frequency Withstand Voltage: 42/65/95kV Lightning Impulse Withstand Voltage: 95/150/215kV Short-circuit Withstand Current: 20/25kA

Fuse

Tin-plated cast red copper. For easy wire connection, two wires of different specifications can be accommodated in a single socket. Other types of sockets are also available. Bird-proof design insulator with insulation performance exceeding ANSI distribution fuse standards. Sturdy fixing hook for securing the load breaker guide tube during closure.