Netherlands GIS Lead-out Bushing

GIS Lead-out Bushing is suitable for GIS transformer substation. It adopts the capacitive voltage-sharing structure, for which the fiberglass is strengthened by immersing in epoxy resin and wrapped with solid insulation.

Category:

NetherlandsBushing

Phone:400-888-8888

Inquire

Product Description

GIS Lead-out Bushing is suitable for GIS transformer substation. It adopts the capacitive voltage-sharing structure, For which the fiberglass is strengthened by immersing in epoxy resin and wrapped with solid insulation. The outdoor part of the bushing is free from SF6 gas, without the risk of air leakage, So there is no need for the inspection and maintenance during operation, Due to no insulation failure caused by temperature changes, It especially apply to the low temperature environment, and the bushing’s outstanding mechanical property can meet the high shock-resistance in service.

Rated voltage: 40.5~1000kV

Rated current: 100~6000A

GIS Bushing can be made in RIP OIP and RIS/RIF type bushings. And the Porcelain or composite sleeve depend on your choice. Each voltage level bushing has pass the type test.

NetherlandsOil-SF6 Bushing

NetherlandsRailway Traction Transformer Bushing

: next page